Gypsum Board Production Line

Gypsum Block is a massive lightweight building material composed of solid gypsum, for Building and erecting lightweight fire-resistant non-load bearing interior walls, partition walls, cavity walls, skin walls and pillar casing indoors.

Standard gypsum block's dimension is 666mm x 500mm x 100mm. We also make machine to cater your requirement. It can be different from block length, width, thickness hole quality, groove height, and etc.

For Paper-faced Gypsum Board

Description:

Gypsum board - skin for the wall

Gypsum is the ideal surface for a wall because it has the same PH value and thermal conductivity properties as the human skin Building materials made of gypsum always feel warm when touched. This is no deception as gypsum possesses low thermal conductivity properties. As a result, gypsum building materials store warmth within a building. Nature has presented us with a high effective moisture management system in gypsum. The gypsum can absorb a lot of humidity through its open and crystalline pores and then automatically releases this moisture when a room becomes too dry. This works as often as necessary, and without consuming energy.

For Paperless Gypsum Board

Description:

Paperless gypsum board works much better as skin for the wall and ceiling tile. Traditional gypsum board is paper faced. Now we have developed our new product, paperless gypsum board. Accordingly, our paperless gypsum board is developed. More gypsum nature, whiter color and more strength! The gypsum board size varies with countries. The board length is from 1.5 to 4 meters(adjustable), the board width is 1.2m or 1.22meters, and the board thickness is from 7mm to 20mm(adjustable)The paperless gypsum board production line is composed of raw material batching system, mixer, board forming station, board setting line, cut-off knife, transfer table, dryer, booking machine, trimming machine and stacker. it is fully automatic. Gypsum board

Gypsum Powder Production Line

We are specialized in designing, developing, manufacturing and installation of gypsum machinery, including gypsum board production line, gypsum powder production line, gypsum block production line and paper faced gypsum board PVC lamination production line.

For Natural Gypsum

Description:

Gypsum is a soft sulfate mineral composed of calcium sulfatedihydrate, with the chemical formula Cas042H20. To make gypsum as construction material, calcination process is needed, and pat crystal water will be removed from gypsum. The calcined gypsum's chemical formula is Cas04. 1/2H20. it is widely used as raw material for gypsum board, plaster, cornice, school chalk, etc. The gypsum board production line is composed of crushing system, grinding system, calcining system, energy supply system, conveying system, packing system and storage system.

For Phosphor Gypsum

Description:

Phosphogypsum refers to the gypsum formed as a by-product of the production of fertilizer from phosphate rock. lt is mainly composed of gypsum (Cas04-2H20).

After the phosphogypsum is treated with our production line, it can be used as construction gypsum and agricultural gypsum

Technology of phosphogypsum treatment: Two-step treatment. The first step is to remove the free water in the phosphogypsum raw material (the process is also called preheating). Hot air and phosphogypsum raw material are mixed during going through hot air tube. The second step is to remove part of the crystal water in the preheated phosphogypsum.

The phosphorus gypsum production line is composed of hot air furnace, preheating system, calcining system, dust collecting system, modifying system, conveying system, packing system and storage system.

For FGD Gypsum

Description:

Flue-gas desulfurization (FGD) is a set of technologies used to remove sulfur dioxide(S02) from exhaust flue gases of fossil-fuel power plants, and from the emissions of other sulfur oxide emitting processes. After the FGD is treated with our production line, the FGD gypsum can be used as construction gypsum and agricultural gypsum.

Technology of FGD treatment: Two-step treatment. The first step is to remove the free water in the FGD raw material (the process is also called preheating). Hot air and FGD raw material is mixed during going through hot air tube. The second step is to remove part of the crystal water in the preheated FGD gypsum.

The FGD gypsum production line is composed of hot air furnace, preheating system, calcining system, dust collecting system modifying system, conveying system, packing system and storage system.

For Alpha Gypsum

Description:

alpha gypsum is produced under high pressure and temperature in autoclave. lt is widely used in dental mold, ceramic mold sculpture, and etc. The alpha gypsum production line is composed of autoclave, grinding machine, elevator, packing machine and etc.